準備工作：首先需要檢查拋丸機設備的各項部件是否正常，如噴頭、除塵系統、輸送系統、電氣系統等。然后根據待處理金屬件的材質和要求選擇合適的拋丸媒體。

Preparation work: Firstly, it is necessary to check whether all components of the shot blasting machine equipment are normal, such as the nozzle, dust removal system, conveying system, electrical system, etc. Then select the appropriate shot blasting medium based on the material and requirements of the metal parts to be processed.

上料：將待處理的金屬件放入拋丸機的清理室內，注意要避免金屬件之間互相碰撞或卡住。

Loading: Place the metal parts to be processed into the cleaning room of the shot blasting machine, taking care to avoid collision or jamming between the metal parts.

成都噴砂生產廠家-拋丸機的使用方法及流程

Chengdu sandblasting manufacturer - usage method and process of shot blasting machine

設定參數：根據金屬件的材質、形狀、大小和處理要求等設定合適的拋丸機參數，如噴丸速度、轉速、噴丸時間、拋丸媒體種類和用量等。

Set parameters: Set appropriate shot blasting machine parameters based on the material, shape, size, and processing requirements of the metal parts, such as shot blasting speed, speed, shot blasting time, type and amount of shot blasting media, etc.

啟動設備：按照設備操作說明啟動拋丸機，并且確認設備運行正常。

Start the equipment: Follow the equipment operation instructions to start the shot blasting machine and confirm that the equipment is running normally.

進行拋丸清理：將拋丸機的噴頭對準待處理的金屬件，開始進行拋丸清理。在清理過程中需要注意金屬件的位置和狀態，以確保清理效果和金屬件的安全性。

Perform shot blasting cleaning: Align the nozzle of the shot blasting machine with the metal parts to be processed and begin shot blasting cleaning. During the cleaning process, attention should be paid to the position and condition of the metal parts to ensure the cleaning effect and safety of the metal parts.

清理完成：清理完成后，停止拋丸機設備，取出金屬件進行檢查和清潔。如需重復清理，則可以重新進行上述步驟。

Cleaning completed: After cleaning is completed, stop the shot blasting machine equipment and remove the metal parts for inspection and cleaning. If repeated cleaning is required, the above steps can be repeated.

成都噴砂生產廠家-拋丸機的使用方法及流程

Chengdu sandblasting manufacturer - usage method and process of shot blasting machine

清理室清理：清理室中會產生一定的噪音、塵土和廢料，需要進行清理和處理，以保持清潔和安全。

Cleaning room: There will be a certain amount of noise, dust, and waste generated in the cleaning room, which needs to be cleaned and treated to maintain cleanliness and safety.

需要注意的是，在使用拋丸機時需要佩戴防護設備，如安全眼鏡、手套和口罩等，以避免受到拋丸媒體和廢料的傷害。同時，根據不同的金屬件和要求，選擇合適的拋丸媒體和設備參數，以獲得佳的清理效果和使用壽命。

It should be noted that when using the shot blasting machine, protective equipment such as safety glasses, gloves, and masks should be worn to avoid injury from shot blasting media and waste. At the same time, according to different metal parts and requirements, choose appropriate shot blasting media and equipment parameters to achieve better cleaning effect and service life.

本文由自動式拋丸機友情奉獻.更多有關的知識請點擊:http://m.9qmv.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from an automatic shot blasting machine. For more information, please click: http://m.9qmv.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇：多工位焊煙集中除塵設備優勢
下一篇：機器人涂裝線的產品特點和技術參數