在車間的日常生產中經常會產生大量有害的焊接煙霧，如何快速找到合適的除塵設備是重中之重。接下來路博環(huán)保小編就為大家科普三種除塵設備，這三種除塵設備可輕松應對多種使用工況，大家可根據自己車間內工況對號入座：

In the daily production of the workshop, a large amount of harmful welding smoke is often generated. How to quickly find suitable dust removal equipment is of utmost importance. Next, the editor of Lubo Environmental Protection will popularize three types of dust removal equipment for everyone. These three types of dust removal equipment can easily cope with various usage conditions, and everyone can seat them according to their own workshop conditions:

1、對于工位少、工作條件相對簡單的焊接車間，可采用移動式焊煙凈化器。

1. For welding workshops with fewer workstations and relatively simple working conditions, mobile welding fume purifiers can be used.

移動式焊接煙塵凈化器適用于凈化各種焊接等場所產生的煙塵。占地面積小，操作靈活，風力大，可有效凈化焊接煙塵。

The mobile welding smoke and dust purifier is suitable for purifying the smoke and dust generated in various welding and other places. Small footprint, flexible operation, strong wind force, can effectively purify welding smoke and dust.

2、對于相對固定的焊點較多的工況，可采用自循環(huán)焊煙凈化器。

2. For working conditions with relatively fixed welding points, a self circulating welding fume purifier can be used.

自循環(huán)焊煙凈化器適用于大型工件和異形件焊接車間的除塵凈化。它不需要鋪設管道。特別適用于有行車的大型車間。即插即用，安裝操作非常簡單。配合脈沖清灰系統(tǒng)，可以有效延長設備使用壽命，降低后期維護成本。

The self circulating welding smoke purifier is suitable for dust removal and purification in the welding workshop of large workpieces and irregular parts. It does not require laying pipelines. Especially suitable for large workshops with cranes. Plug and play, installation operation is very simple. Cooperating with a pulse cleaning system can effectively extend the service life of the equipment and reduce maintenance costs in the later stage.

3、對于需要對整個焊接車間的煙塵進行處理的情況，可采用中央焊接煙塵凈化器。

3. For situations where it is necessary to treat the smoke and dust in the entire welding workshop, a central welding smoke and dust purifier can be used.

這種中央焊接油煙凈化器更受大公司的歡迎。它具有強大的吸力和強大的凈化效果。它由管道和主機組成。其工作原理是在車間鋪設大量管道，收集焊接煙塵，通過管道將其輸送到除塵器內，凈化后的潔凈氣體由排風口排放到空氣中。

This type of central welding fume purifier is more popular among large companies. It has strong suction and purification effects. It consists of pipelines and hosts. Its working principle is to lay a large number of pipelines in the workshop, collect welding smoke and dust, and transport them to the dust collector through the pipelines. The purified clean gas is discharged into the air through the exhaust outlet

上一篇：機器人涂裝線：機器人噴漆線的運作原理及介紹
下一篇：車間粉塵怎么處理？