噴砂清理室是噴砂清理作業的專用場所。噴砂清理設備以壓縮空氣為動力，將彈丸加速到50m/s以上的速度，噴射到工件表面上，撞擊鐵銹，使其脫落除去。清理室底部滿鋪格柵板初步清理鋼砂攔截大塊物料，防止堵塞彈丸循環系統。彈丸循環系統通過機械自動收砂的方式，將噴砂時散落的彈丸、氧化皮收集，通過分離凈化后合格彈丸落入儲料箱備用。01

　　The sandblasting cleaning room is a dedicated place for sandblasting cleaning operations. The sandblasting cleaning equipment is powered by compressed air, which accelerates the projectile to a speed of over 50m/s and sprays it onto the surface of the workpiece, hitting the rust to remove it. The bottom of the cleaning room is fully covered with grid plates, and the steel sand is preliminarily cleaned to intercept large pieces of material and prevent blockage of the projectile circulation system. The pellet circulation system collects scattered pellets and oxide scales during sandblasting through mechanical automatic sand collection, and after separation and purification, qualified pellets fall into the storage box for backup. 01

　　它的組成部件1室體噴砂房室體是噴砂的工作場所，它是由框架和墻板組成的外部封閉采用厚3mm鍍鋅板，內墻四周襯4mm耐磨橡膠防護板。

　　Its component 1 is the sandblasting chamber, which is the workplace for sandblasting. It is composed of a frame and wall panels. The external enclosure is made of 3mm thick galvanized sheet, and the inner walls are lined with 4mm wear-resistant rubber protective plates.

　　2大門電動柔性門，是能快速升降的無障礙隔離門，主要作用是快速隔離，從而保證車間空氣質量無塵等級。具有保溫、保冷、防蟲、防風、防塵、隔音、防火、防異味快速、采光等多項功能，并廣泛用于機械、化學、紡織、電子、超市、冷凍、物流、倉儲等多種行業，可極高的滿足高性能物流及潔凈場所，并且節省能源，高速自動關閉，提高作業效率，創造更佳的作業環境等優點。

　　The 2-door electric flexible door is a barrier free isolation door that can be quickly lifted and lowered. Its main function is to quickly isolate and ensure the dust-free level of the workshop air quality. It has multiple functions such as insulation, cold insulation, insect prevention, wind prevention, dust prevention, sound insulation, fire prevention, odor prevention, and lighting. It is widely used in various industries such as machinery, chemistry, textiles, electronics, supermarkets, refrigeration, logistics, and warehousing. It can meet the requirements of high-performance logistics and clean places, save energy, automatically close at high speed, improve work efficiency, and create a better working environment.

　　3照明裝置由于噴砂作業時，且室內粉塵較高，按照通用規范，噴砂房內照明度必須≥300LUX。考慮到鋼砂飛濺會對燈具造成損壞，故設計將燈具放在室外，透過鋼化玻璃照射室內，在室內頂部安裝兩列，在其側部各安裝一列，照明效果好。4格柵板如圖所示，大家看到底部噴丸室地板采用金屬格柵，一方面可以收集噴下來的彈丸通過彈丸循環系統通過機械自動收砂的方式，將噴砂時散落的彈丸、氧化皮收集，通過分離凈化后落入儲料箱備用。另一方面有利于工人的行走安全。5噴丸槍1）罐體罐體的主要作用為容納磨料。上部裝有加料閥（及料位計），罐體下部出料處接有加濃噴丸閥，中部固定著氣源處理系統。為維修方便，罐體上開有檢修口。

　　Due to sandblasting operations and high indoor dust, according to general regulations, the illumination level in the sandblasting room must be ≥ 300LUX. Considering that steel sand splashing can cause damage to the lighting fixtures, the design places the fixtures outdoors and illuminates the interior through tempered glass. Two rows are installed on the top of the interior, and one row is installed on each side for good lighting effect. As shown in the figure, the bottom shot blasting room floor is equipped with a metal grille. On the one hand, it can collect the sprayed pellets through a pellet circulation system and automatically collect the scattered pellets and oxide skin during sandblasting through mechanical sand collection. After separation and purification, they fall into the storage box for later use. On the other hand, it is beneficial for the walking safety of workers. The main function of the tank body is to contain abrasives. The upper part is equipped with a feeding valve (and level gauge), the lower part of the tank is connected to a concentration shot blasting valve at the discharge point, and the middle part is fixed with a gas source treatment system. For the convenience of maintenance, there is an inspection port on the tank body.

　　2）加料閥加料閥是由錐閥體及導桿組成。當向罐內充氣時，錐體上移，上錐面與密封圈壓緊，達到罐體密封的目的，從而建立罐內壓力。

　　2) The feeding valve is composed of a conical valve body and a guide rod. When inflating the tank, the cone moves upward and presses against the sealing ring, achieving the purpose of sealing the tank and establishing the pressure inside the tank.

　　3）加濃噴丸閥加濃噴丸閥是磨料與空氣混合加速的裝置。磨料進入噴丸閥之后，在混合室中與空氣充分混合，并得到加速，由噴射口噴出。調整噴丸閥手輪，可以改變進入混合室的磨料流量，從而得到滿意的混合比例，得到最佳噴丸效果。

　　3) Concentrated shot blasting valve is a device that accelerates the mixture of abrasive and air. After entering the shot blasting valve, the abrasive is fully mixed with air in the mixing chamber and accelerated, and is sprayed out from the injection port. Adjusting the handwheel of the shot blasting valve can change the flow rate of abrasive entering the mixing chamber, thereby achieving satisfactory mixing ratios and the best shot blasting effect.

　　6皮帶輸送機皮帶輸送機是在格柵板的底部彈丸落到皮帶輸送機通用帶式輸送機主要由機架、皮帶、電動滾筒、托輥、拉緊裝置以及支承架等幾部分組成。皮帶繞經兩端滾筒后，用皮帶卡子或硫化方法，將兩頭接在一起，使之成為閉環結構。皮帶由上、下托輥支承著，由拉緊裝置將皮帶拉緊，具有一定的張力。當電動滾筒旋轉時，借助于電動滾筒與皮帶之間的摩擦力帶著皮帶連續運轉，從而將裝到皮帶上的鋼丸送出

　　A belt conveyor is a universal belt conveyor consisting of a frame, belt, electric drum, idler, tensioning device, and support frame. After the belt passes through the rollers at both ends, use belt clips or vulcanization methods to connect the two ends together to form a closed-loop structure. The belt is supported by upper and lower rollers and tightened by a tensioning device with a certain tension. When the electric drum rotates, it continuously runs with the belt by means of the friction between the electric drum and the belt, thereby sending out the steel balls loaded on the belt

　　7提升機功能是將丸砂混合物從橫向皮帶輸送器輸送到清理機頂部的分離器里

　　The function of the hoist is to transport the pellet sand mixture from the transverse belt conveyor to the separator at the top of the cleaning machine

　　8分離器丸渣混合物由提升機提升至分離器滾筒篩中它會將好的彈丸和壞的彈丸分離出來以便于好的彈丸重復利用，壞的彈丸粉塵被吸入除塵器進行凈化處理，碎丸、不合格的小顆粒彈丸、氧化皮進入廢料桶.等等部件組成

　　The mixture of 8 separator pellets is lifted by the elevator into the separator drum screen, which separates the good pellets from the bad pellets for reuse. The bad pellet dust is sucked into the dust collector for purification treatment, and the crushed pellets, unqualified small particle pellets, and oxide skin enter the waste bin Wait, component composition

　　本文由  自動噴砂房 情奉獻.更多有關的知識請點擊  http://m.9qmv.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is dedicated to the automatic sandblasting room For more related knowledge, please click http://m.9qmv.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

上一篇：VOCs揮發氣回收設備:治理不是“走過場”，而是“真見效”
下一篇：機器人自動噴粉線：由 “經驗” 到 “智控” 的生產革命正在爆發！